Ideal target for mixing process of dry powder mixer
The ideal target of the hybrid process is the two:
One, mixed to do the material on the macro:
This is the same as the content of a variety of powders that are required to be sampled from the upper, lower, left and right parts of the equipment container. It is usually used to choose the equipment container, so that the powder can be used as a whole in the movement equipment container to achieve the purpose of macro and uniform. And the use of equipment and equipment container is easy to produce the material, it is difficult to achieve the purpose of macro.
Two, after mixing to achieve a variety of powder on the uniform:
This is a high standard of requirements, only the powder inside the body is subjected to numerous times of full shear, the powder particles and particles are repeatedly cut, and then cut...... Finally reached the microscopic particles between the full dispersion, the full uniform, that is, to achieve a uniform.
In order to achieve this purpose, the equipment can have a shear method, such as the equipment of the blade stirring movement, at the same time, the blade density should be large, the speed is not high. This is in order to increase the efficiency of mixing and not damage the powder particles. If only the overall movement of equipment containers can not be repeated in the powder internal shear, so it is difficult to achieve uniform.
The two sets of special drive system of gold and double motion dry powder mixing machine, driven by the drive of the material barrel movement and the high speed movement of the blade.
The first set of drive system: directly drive the outer cylinder rotation. Rotary cylinder in the work is to rotate along the inclined shaft, one can eliminate the "bottom" of the cylinder material dead; two can make the barrel material around, up and down, directly involved in the mixing
