Ceramic tile is with refractory metal oxide,the raw material is mainly mixed by quartz sand and clay . After the process of grinding, mixing, pressing, glazing and sintering , and form a kind of an acid alkali resistant porcelain, such as ceramic or stone construction or decorative materials.
In this competitive climate,ceramic tile manufacturers have to promotes the speed of researching new produce.Only in this way,they can meet consumers demand and keep up with the development of the field.So mixture,the most important process during the ceramic tile production,is subjected to value more and more.Also the mixing uniformity of the materials is in direct relation to the quality of ceramic tile.The survey found that the traditional blender cannot satisfy the standard of the mixing ceramic tile industry.
A new ceramic tile material company heard about the
double movement powder blender of Zhengzhou Jin Tai from commercial peers.Later ,we were done the free-charge mixture experiment in the laboratory of our company.After testing for material,we found following features.
1st Powder is damp and liquidity is not good
2nd Powder clustered and cannot be easily dispersed
3rd Several kinds of the powder in large diameter difference
The laboratory director of Zhengzhou Jin Tai advise that materials should be simple pretreatment before mixed.It helps to fully mixing.First should be simple dehumidification,for drying of powder and enhance the fluidity of the powder.Then,sieve the powder and creen out the hard particles formed during the drying process.Last,use the
double movement powder blender to mix the powder and ensure that the mixing uniformity can reach the ideal index.
After using our
double movement powder blender,the customer says that it will save 5-10 minutes after doing the pretreatment and the mixing unifority could be better.
Edited by Penny Wu
